ProLiant is a brand of server computers that was originally developed and marketed by Compaq and then by HP. The line ML is designed for mall to medium-sized businesses and to bring expandibilty and long term efficency.
My servers are model HP ProLiant ML330 G3 and HP ProLiant ML150 G2. For connectivity I've a simple 10/100 Ethernet Switch and two router/access point wireless D-Link WRT54G modded with DD-WRT firmware.
I thing somwhere in my home I've got also one or two UPS, but I have to check.
The most difficult thing now is to plan the architecture using only the hardware I have, but this hardware is really annoying so I'm not sure about what I can use! So everytime I work building the computer I have to modify what I can do with them.
The two servers (technical description)
The most powerful server is the ML150 (year 2006) and it will be user as primary server:
- Intel® Xeon 3.0 GHz/800 with 1MB level 2, support for Hyper-Threading and EM64T
- Intel® E7320 chipset
- 1 GB of PC2700 ECC capable DDR SDRAM standard
- 1 PCI-Express Gigabit NIC (embedded) + 1 PCI FastEthernet PCI NIC 10/100 Mb
- Support for up to 6 SATA hard drives with 6 Port SATA RAID Controller
- Integrated Single Channel Wide Ultra3 SCSI Adapter in a PCI slot
- IDE (ATAPI) DVD-ROM drive
- Six expansion slots: four 64-bit/66-MHz PCI-X, one x4 PCI-Express, and one 32-bit/33MHz PCI
The second server is the ML330 (year 2003):
- Intel Xeon Processor 3.06 GHz/533 with 512KB level 2, support for Hyper-Threading
- ServerWorks Grand Champion SL Chipset with 533-MHz Front Side Bus
- 896 MB of PC3200 ECC capable DDR SDRAM standard
- NC7760 PCI Gigabit Server Adapter
- Integrated Dual Channel Ultra ATA 100 IDE Adapter with Integrated ATA RAID
- One 38GB and one 39GB Ultra ATA 100 Hard Drives
- IDE (ATAPI) DVD-ROM drive
- Four expansion slots: four 64-bit/66-MHz PCI-X 3.3Volts
And then I havn't got the 2nd network card for the second computer, because it requires only a 64bit/3.3V PCI card.... I have to buy it, shit!
Connectivity (technical description)
The switch is... a simple switch! By now I don't have plans for it but it is here....
The two Access Point are really useful because I can put the servers wherever I want in the house and the modded firmware has a very powerful and configurable console for routing and network management and analys.
DD-WRT is a Linux based alternative OpenSource firmware suitable for a great variety of WLAN routers and embedded systems. The main emphasis lies on providing the easiest possible handling while at the same time supporting a great number of functionalities. Among the most useful things there is Access Restrictions, DHCP Server and Forwarder, DNS Forwarder, Hotspot Portal, OpenVPN Client & Server, Port Triggering, Port Forwarding, QoS Bandwidth Management, QoS L7 Packet Classifier, Routing, Syslog, SNMP, SSH Client and Server, Startup, Firewall, and Shutdown scripts, VLAN, WoL, WDS Connection Watchdog, WDS Repeater Mode, Wireless MAC filter.


Very very good! I completed the hardware installation, I found an ethernet card suitable for the PCI 3.3V and I succeded in installing two P-ATA hard drives.
RispondiEliminaI think I will not use both of the acces point, because I need the full speed of the two integrated gigabit ethernet for synchronization!